Solaredge Wifi settings (screenless models)

How to Reconnect Your SolarEdge Inverter (No Screen) to Wi-Fi


Step-by-Step Instructions:

  1. Download the mySolarEdge App

    Open it, navigate to Inverter Communication → Configure.

  2. Select and Join Your Home Wi-Fi

    Choose the network, enter your password, and tap Join.

  3. Verify Connection

    Return to Inverter Communication—look for S_OK indicating success.

If the App Doesn’t Work:

  1. Locate the small lever on your SolarEdge inverter.
  2. Move it left and hold for ~30 sec until LEDs flash rapidly. Release.
  3. Quickly move lever left again and release to activate local Wi-Fi mode.
  4. On your phone/laptop, connect to the inverter Wi-Fi (SSID & password on inverter sticker).
  5. In your browser, go to:
http://172.16.0.1
  1. Log in (password also on inverter sticker). Navigate to Site Communication, switch from Ethernet to Wi-Fi.
  2. Then reconnect to your home Wi-Fi. Finally, check the app for online status.

Need More Help?

Still need help? Contact Us Contact Us